Carrello 0

Anta Ribalta 3D Futura for Hammer Basic configuration Giesse

Giesse
Brands: Giesse
Code: A/R 3D MART
£ 0,00
Prices excluding VAT
You have chosen:

Unavailable
Anta Ribalta 3D Futura for Hammer Basic configuration Giesse

future giesse down door 130


Giesse door fore future 3D

This configuration for folding door contains the following items Giesse:
article Description Amount Color
04705N base assembly hardware for window handle 1 neutral
04711xxx lower and upper hinges Group 1 choice
04285000 arm type 2 from 575 to 1700mm microventilato * 1 arm neutral
04284000 arm type 1 from 410 to 570mm microventilato * 1 arm neutral
04353000 arm type 0 from 350 to 410mm
not microventilato
* 1 arm neutral
02476xxx hammer model Prima Plus ** 1 choice

The choice of color is determined by the customer selecting the appropriate option.

* You will be given one arm between the three proposed (your choice by selecting the second option).

** On request it is also possible to have the model hammer First Key, Euro or Asia.

Optional items (sold separately on Windowo):
  • vertical and horizontal additional closures (Art. 04.77 million), required for doors with a height or width greater than 1200mm;
  • Additional arm (art. 04301000), which is compulsory for windows and doors with increased leaf width of 1020mm;
  • Items to be used in case of a second door (combined group door hinges art. 04711xxx, hinge connecting arm combined with art. 04728000, bidirectional deadbolt Art. 02191000 and meeting its superior art. 01348000).


Code: 04705N
locking mechanisms to Anta Ribalta to hammer in the Base version. Referral, towing, toe movement and meetings in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Screws and set screws in stainless steel. Raising polyamide.



Code: 047011
Group hinges (upper and lower), completely pre-assembled and ready to be installed on the profile. Body in extruded aluminum and brass hinges. Supports in zamak with GS Silver Plus finish (up to 500 h of corrosion resistance). Pins, screws and set screws in stainless steel.



Code: 04285 (Arm Type 2) - 04284 (Arm Type 1) - 04353 (Arm Type 0)
Allow the flap opening in conjunction with the mechanisms. Body, fixing block and drawstring in zama with GS Silver Plus finish (up to 500 h of corrosion resistance). Rod, rod, screws and stainless steel screws. Diskette stop polyamide.







Code: 02476 - Hammer First Plus
Martellina on both sides for the actuation of the Giesse mechanisms.

The handle, die-cast aluminum, it blends aesthetically with the Cremona line before. E 'of the positioner fitted to the stopping of the rotation to 90 °, and 180 ° and has a square pin, for the transmission of the movement, the section of 7 mm and length 45 mm.

Materials: die-cast aluminum shaft, rotor galvanized zamak, cast aluminum lid, sottorosetta plastic resin framework and galvanized steel screws.

On request it is also possible to have the model Cremona First Key, Euro or Asia. If you are interested contact us.



Products that might interest you

Recently viewed products

Newsletter

Seguici

© Windowo All rights reserved - VAT: 02324570221 Software Ecommerce by Daisuke ®